-40%
20" Heavy Duty Fiberglass Thermoplastic 1 HP Shallow Well Jet Pump FIP Discharge
$ 186.37
- Description
- Size Guide
Description
DescriptionThis 1 HP shallow well jet pump has a heavy-duty dual voltage motor preset at 230V. The fiberglass-reinforced thermoplastic pump housing provides superior corrosion resistance and is ideal for regions with aggressive water. This jet pump features a pre-wired pressure switch, and self primes after the housing is initially filled with water. The pump comes ready to install and is designed for wells with depth to water of 25 ft. or less.
Shipping Dimensions:
22.75 H x 11.25 W x 10.75 D
Shipping Weight:
26.0 lbs
Brand Name:
Simer
Features
Maximum pumping capacity to 16.4 gallons per minute
Pumps up to 8.1 gallons per minute at 25' well depth
115/230 volt motor
Maximum shut-off pressure of 67 PSI
Pressure switch pre-set to 30-50 PSI
Specifications
Actual Depth
20 inch
Actual Height
8-3/4 inch
Actual Width
9-3/16 inch
Amperage
230 volts - 7.4, 115 volts - 14.8
Discharge Connection Gender
Female Iron Pipe (FIP)
Discharge Connection Size
1 inch
Flow Rate
16.4 gpm @ 5', 12 gpm @ 20', 14.1 gpm @ 15', 16.1 gpm @ 10', 8.1 gpm @ 25'
Horsepower
1
Housing Material
Thermoplastic
Includes
Pressure switch
Inlet Connection Gender
Female Iron Pipe (FIP)
Inlet Connection Size
1-1/4 inch
Listing Agency Standards
CSA, UL, UL778/CSA108, cCSAus Certified, CSA, UL Listed
Maximum Discharge Flow Rate
16.4 gallon per hour
Maximum Output Pressure
67 PSI
Number of Impellers
1
Product Type
Shallow Well Jet Pumps
Pump Type
Shallow Well
Submersible
No
Switch Type
Pedestal
Voltage
240, 120
Weight
29.77 pound
1028jhsaopuaskfjhbaswr
If in any case, you are not satisfied with the item you received, please contact us and we will do our best to help. Please do not leave us negative or neutral feedback or open return request/case before allowing us to solve the issue.
Please note, returned products must be in unused condition, in the original packaging and contain all paperwork, a restocking fee may be applied for returns of merchandise unless the item arrives damaged or you receive the wrong item.
Unfortunately, as of August 2018 we became aware that the state of California is enforcing new "Proposition 65" rules. That means we have to certify and label anything we ship/sell to California with a Prop 65 label. This is simply not a sensible thing for us to do with SOME of our items at this time. Due to those recent laws and regulations, certain products are prohibited from being shipped to those addresses. We apologize for any inconvenience this may cause. If you would like to be sure the item can be shipped to your address, please send us a message prior to your purchase.